Klartext Portal – The Information Site for HEIDENHAIN Controls
Slider_Programierplatz

PC programming station

With the programming station you have the capability to program just as you do at the machine, but away from the noise and distractions of the shop floor. Since the programming stations are based on the same software as the controls, they are also ideally suited for apprentice and advanced training.
Find out more...

TNCremoPlus2

TNCremo

The free PC software package TNCremo supports the user during data transfer from the PC to the TNC. With TNCremo and an Ethernet or other data interface, you can bidirectionally transfer externally saved part programs, tool tables and pallet tables, start the machine, create backups of the hard disk and sample the operating condition of the machine.
Find out more ...

fixture_wizard

Fixture Wizard

The PC software Fixture Wizard provides important information to the control for avoiding collisions between the tools and fixtures when using new tooling. With Fixture Wizard you can define the contour of clamping tools. The generated file is then output in a format that the TNC can read (*.cft). This step is a prerequisite for the Dynamic Collision Monitoring function (DCM).
Find out more ...