Commissioning and optimization: Basic training

For the TNC 620/TNC 640/TNC7 contouring controls

Course contents

  • Clarification of open questions related to project planning and configuration
  • The control loop of the TNC
  • Commissioning aids
  • Optimizing the NC axes with standard drive
  • Optimizing the NC axes with torque motor or linear motor
  • Optimizing the spindle drive
  • Setting the monitoring function
  • Fundamentals of axis error compensation 

Please bring your own computer or notebook, which must meet the following requirements:

  • Microsoft Windows
  • Zip-compatible extraction software
  • Authorization to install software
  • USB port with removable media access
  • Ethernet connection with cable
  • Configured network environment (Ethernet TCP/IP)
  • PC processor supporting the AVX2 instruction set

 HEIDENHAIN cannot provide any computers or notebooks for the course.

Objectives of the course

  • With the help of a guideline the participants are able to commission an axis or the spindle and can optimize the control loops such that a standard machine parameter set is determined
  • The participants learn to work with the TNCopt computer software
  • Special “customized” requirements (such as the adjustment of nominal position value filters) cannot be treated in detail
    look at training TNC-OPT Workshop

Target group

  • Specialists in machine adaptation, commissioning and service from machine tool builders and retrofitters

Requirements

  • Solid background in NC-controlled machine tools
  • Knowledge of electronics / electrical engineering
  • Machine configuration is already finished
ID: 374 Number of free places
29.07.2024 - 02.08.2024
Location

HEIDENHAIN Training Center, Traunreut

Further providers/locations see button "Training worldwide"

Pricing

€ 2,100 plus VAT per participant

Duration

4.5 days
Monday 8:00 a.m. to
Friday approx. 12:00 noon

Number of participants

Maximum 8

Commissioning and optimization: Basic training For the TNC 620/TNC 640/TNC7 contouring controls
  • Clarification of open questions related to project planning and configuration
  • The control loop of the TNC
  • Commissioning aids
  • Optimizing the NC axes with standard drive
  • Optimizing the NC axes with torque motor or linear motor
  • Optimizing the spindle drive
  • Setting the monitoring function
  • Fundamentals of axis error compensation 

Please bring your own computer or notebook, which must meet the following requirements:

  • Microsoft Windows
  • Zip-compatible extraction software
  • Authorization to install software
  • USB port with removable media access
  • Ethernet connection with cable
  • Configured network environment (Ethernet TCP/IP)
  • PC processor supporting the AVX2 instruction set

 HEIDENHAIN cannot provide any computers or notebooks for the course.

B TNC-OPT en 29.07. - 02.08.2024, week 31 2024-07-29 2024-08-02

HEIDENHAIN Training Center, Traunreut

Further providers/locations see button "Training worldwide"

2100 5