In our NC Solutions database you will find solutions for frequently required tasks

Watzmann model

Watzmann model

NC6050

NC program to create a relief model of the Watzmann. Machining is performed in four steps: Roughing, roughing of residual material, pre-finishing and finishing. The difference between the two provided programs is that in Program 6050_3X_de.h, machining is performed completely in three axes, whereas in Program 6050_5X_de.h, finishing is performed in a five-axis movement. The programs were written with a CAD/CAM system, with the five-axis machining operation being defined in LN blocks with T vectors.

The program 6050_5X_de.h was made for a machine with the kinematic model A/C rotary tilting table.

Video

Programm 6050_3X_en.h

Programm 6050_5X_en.h

Product type

TNC 640 iTNC 530 Milling in 3 axes (X, Y, Z) Milling in 5 axes (X, Y, Z + tilting axes) Demos and sets of drawings CAM examples Milling NC program TNC 620 Programming station Programming station VirtualBox Machine control TNC7
Back to overview