Kinematics Definition: Basic training online

for Kinematics Definition for TNC Controls

Course contents

Course part 1 – Kinematic Basics
(3 days)

  • Fundamentals of the kinematic model
  • Machine parameters for the tilting transformations
  • Kinematic tables for software 34049x
  • Structure of the kinematic model on NC-kernel based controls
    (TNC 320/TNC 620/TNC 640)
  • Manual generation of kinematic configurations
  • Creating kinematic configurations using KinematicsDesign
  • Manual calibration of transformation dimensions
  • Calibration of kinematic transformations using KinematicsOpt

Objectives of the course

  • Making kinematic configurations for various types of machines on the iTNC 530 (TNC 320/TNC 620/TNC 640)
  • Calibrating the kinematic transformation dimensions

Target group

  • Only for specialists in machine interfacing, commissioning and service from machine tool builders and retrofitters

Requirements

  • Operation and handling the iTNC 530 (TNC 320/TNC 620/TNC 640)
  • Knowledge of the configuration of iTNC 530 and NCK
  • Good working knowledge of NC-controlled machine tools

Hardware / Software

  • Stable Internet connection >= 25 Mbit
  • Administrator rights on the PC
  • Up-to-date browser, e.g. Mozilla Firefox or Google Chrome
  • Webcam is recommended
ID: 32328 Number of free places
14.10.2025 - 16.10.2025

€ 1,400 plus VAT per participant

Location

ONLINE

Further providers/locations see button "Training worldwide"

Pricing

€ 1,400 plus VAT per participant

Duration

3 days
Tuesday 8:00 a.m. to
Thursday 4:00 p.m.

Attention:
Online courses always take place at the indicated Central European Times (CET)

Number of participants

Maximum 6

Kinematics Definition: Basic training online for Kinematics Definition for TNC Controls

Course part 1 – Kinematic Basics
(3 days)

  • Fundamentals of the kinematic model
  • Machine parameters for the tilting transformations
  • Kinematic tables for software 34049x
  • Structure of the kinematic model on NC-kernel based controls
    (TNC 320/TNC 620/TNC 640)
  • Manual generation of kinematic configurations
  • Creating kinematic configurations using KinematicsDesign
  • Manual calibration of transformation dimensions
  • Calibration of kinematic transformations using KinematicsOpt
Kinematics Definition: Basic training online 14.10. - 16.10.2025, week 42 2025-10-14 2025-10-16

ONLINE

Further providers/locations see button "Training worldwide"

1400 6